INTRODUCTION
HS Series Symons Cone Crusher is widely used in the metallurgical industry, construction materials industry, road building industry, chemical industry and silicate industry. It is suitable to crush ores and rocks with medium hardness and medium hardness above. It has features of strong crushing force, reliable structure, high efficiency, high capacity, low operating cost, easy adjustment, economical to use and so on. Also symons cone crusher uses the compensating lubricating grease sealing, it can avoid lubrication oil being polluted by dust, so that all parts work reliably and have a long operating life. The safety insurance system of cone crusher uses several spring sets, so the matter and iron ore are down from the crushing cavity and do not damage the crusher, simply and reliably. The safety system uses dry oil and water as two kinds of sealed formation to make plaster powder and engine oil separate to make sure reliable performance.
The cone crusher has standard type and short head type, the standard type is suitable to medium size and the short head type for medium and fine crushing.
Working principle：
HS cone crusher is mainly composed of frame, fixed cone assembly, moving cone assembly, spring mechanism, bowl type shaft frame and transmission; its auxiliary part is cleaned by electrical system, thin oil lubrication system and hydraulic pressure. The cavity system is composed.
During operation, the motor drives the eccentric sleeve through the V-belt, the large pulley, the transmission shaft, the bevel gear, and the large bevel gear. The broken cone axis is rotated under the eccentric bushing, so that the wall surface is broken. Close to the surface of the rolling wall, and then the material is continuously crushed, crushed and bent in the annular crushing cavity composed of the fixed cone and the moving cone. After multiple extrusions, impacts and bending, the material is broken to the desired particle size and discharged through the lower portion.
